Use one of these inspiring DIY clock designs to create an amazing new timepiece.

The clock can be both decorative and functional. But decorating the clock will greatly reduce your home or office decoration budget. Fortunately, you don't have to splurge on one, because with a little creativity, you can turn almost anything from ping pong balls to wood into a clock. Take a look at these ten amazing DIY clock ideas, they will instantly change your home or office space.

This DIY clock uses ping pong balls as a diffuser for a set of LED lights that show the time. When closed, it looks like a group of ping pong balls stacked in a frame, but when opened, the LED light show creates a stunning visual effect while displaying the time. And it is also very easy to make.

First, find about 100 ping pong balls (decrease or increase the number to create a clock of the size you want), cut each ping pong ball directly below the center line to form a hexagon, and then glue them together. Finally, stack them into a frame (any shape you like), where the LED and Arduino are already on the backplane to complete the setup.

If you like analog clocks, this DIY light clock is the perfect way to experience the sense of technology and modernity. Unlike standard analog watches, this DIY model uses light to tell the time. You can use any color combination you like, and the best part is that it uses Arduino, which means it can be programmed to run on Wi-Fi, making it easier to remotely control. See what you need to do in this guide.

Related: Best Arduino LED Project

Linear clocks are usually simple and concise, and are an excellent addition to any desk. So follow this simple DIY guide to make one and skip the cost of buying one. It runs on an Arduino connected to a motor driver and uses a stepper motor to control the clock hands.

You need a foam core board, a pair of curtain rails, pulleys and stepper motors, four sewing spools, thick wires, an Arduino and a 6-9V power supply. Follow the steps shown in the guide, and then run the code to watch your linear clock ticking.

This is another simple but powerful DIY clock. It has an extraordinary white 3D design with numbers in and out of the panes, forming shadows, allowing you to see them and tell the time.

For this project, you need Arduino Uno, a servo motor controller, about 28 servos to move all digital segments, and a DS1307 clock interrupt to track time. You also need cardstock to set numbers, double-sided tape, adhesive pads, aluminum tubes, paper cutters, glue guns, and knives.

Upon completion, you will have an amazing DIY clock with a unique 3D digital change mechanism. Check out a step-by-step guide on how to successfully complete this project.

This DIY clock must be one of the coolest timepieces you try to make. It is like a giant mechanical watch with a quartz movement, except that it is made of MDF and uses a PIC 16F628A microcontroller to track the time and a stepper motor to control the movement of the clock hands.

Do you want to add a rustic feel to your home or office? This wooden block LED clock is your perfect DIY timepiece. Its production and use of materials are very simple, you can quickly purchase, such as microcontrollers, super bright LEDs, laminated single-board MDF frame, low-power transistors and real-time clock. When finished, it will display the time in different LED colors instead of regular numbers.

Are you tired of staring at the same old analog clock? Upgrade it by adding a rotating digital dial to display the time in a different way.

The best part? You only need easy-to-use tools and materials, such as scissors, printers, glue, cardstock, paper, and an existing analog clock (a desk clock is the easiest to rebuild).

Disassemble the clock first, then make the most of this easy-to-follow guide to complete the setup.

If you have been fascinated by celestial bodies, this DIY moon phase clock is a good opportunity for you to bring celestial bodies to your office or home. It can accurately track the different phases of the moon phase and is a perfect complement to the bedside table, mainly because it can double as an alarm clock with light mode, moon FX mode, date, temperature, and even has a wake-up light alarm clock function.

To build it, you need an Arduino Nano, OLED display, super bright LED strip, real time clock, DHT11 sensor, buzzer and three buttons.

Related: Best Raspberry Pi Smart Mirror Project

Hate that time seems to pass so fast when eating lunch in the office? Well, this DIY clock allows you to steal an extra 12 minutes during a break, slowing down during this time!

It uses an Arduino with an additional ATmega chip and some other components to slow down the time at 11 am by about 20%, and then speed it up by the same percentage at 11.48 am, giving you an extra 12 minutes of guilty lunch time. If you Your boss comes when you are still resting, point out the time, and they will leave you.

Check out this step-by-step guide to successfully complete this project.

Do you need a small but unique clock for your office or bedside table? If so, there is no doubt that this amazing DIY clock idea will instantly change your home or office space. In addition, this is a great way to get the most out of your old DVD player.

After completion, you will not only have a standard clock, but also wireless control, temperature sensor, and even activation by PIR motion sensor. Check out this guide for step-by-step instructions.

Just because we live in an era when people use smart watches and smart phones to tell the time, it doesn't mean that your home or office clock must be boring. The ten amazing DIY clock ideas above prove that it is both beautiful and practical. Therefore, please use them as inspiration and enjoy making your favorite works.

These DIY projects are a great way to save money and upgrade office technology within a budget.

Alan Blake is an enthusiastic and proficient writer who likes to explore, learn and share his discoveries in fascinating ways. He not only likes to keep up with SEO trends, but also like to keep up with technological progress. He is currently a writer at MakeUseOf, where he covers technical DIY in other areas.

Join our newsletter to get technical tips, reviews, free e-books and exclusive offers!