safety reflectors plastic traffic road signs warning reflective tape
                                                              PLASTIC reflector 

                                                                     reflector
 

color:red/white color 

Size:5cm*15cm/pc

Feature:High reflector

Usage:truck reflective instead of the regalur reflective tape.

Installing:Use screws or sticker

                                       

MOQ:100 Picese

Product pictures:

                                              reflective material safety reflector





OTHERS REFLECTIVE TAPE WE HAVE:

Installation Guide:

 

The Vehicle have the Protective device,the reflective tape can be stick on the Protective device .If the Vehicle

can not stick the reflective tape,should stick the reflective tape on the scale board and install on the car body .

 

The Place where to stick the reflective tape should clean and remove the greasy,

peel off the release paper and stick on the truck and pressed firmly.

 

1.First ,should spray a little water on the surface then after stick the reflective tape

can also remove ,it can made sure the location is correct .

 

2.Slowly peel off the release paper and push out the bubble when you stick the reflective.

 

3.If there is very cold and can not sweep the edge ,you can use the heat gun heated and

after melting the glue it can be remove

 

4.To stick the reflective tape on the point need to stick ,made sure the place need stick

and then use the scraper or credit card to scrape out the water and bubble or you can

used heat gun to made it dry .

 

5.After stick the reflective tape should keep the car away from water.

other diy reflective sticker we have 

                                                                                   quick contact
                                                              lilian zhong +8613678931543
                                     choose us!we will be your reliable supplier!!!